Foil Transfer Test

gold and metallic blue foils

This winter I obtained a sample of a water based screen printing foil adhesive and some short lengths of gold and metallic blue foil from our friends at Willox Graphics in Burnaby. I’d read about foil transfers before, but never had a chance to try them out until recently.

Gen IV foil adhesive

For my test, I made a simple stencil of snowflake patterns that I had previously printed on necktubes for the Cold Snap Festival during the 2015 Canada Winter Games in Prince George. I chose a screen with LX-135 mesh that could print decent detail on dark fabric. It’s a cool new kind of mesh that can print a heavy deposit of ink while retaining detail.

Snowflake stencil

The foil transfer process is simple: print the adhesive on some fabric and let it air dry overnight. The next day, I put the sample prints in our heat press under pressure @300F for 12 seconds with foil sitting on top and a silicon release sheet on top to protect everything from the hot platen. After allowing them to cool, I peeled the foil material which left shiny gold and metallic blue where the adhesive retained them.

Next time I will make an extra-thick stencil by recoating a previously coated, dried screen. This will make it easier to print a heavier deposit of the adhesive and – theoretically – obtain more consistent adhesion. And I might use a design with less finicky detail! But this was an enjoyable experiment.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s